Announcements for operating aquatic breeding pump

When operating aquatic breeding pum,we should pay attention to these following announcements:

1.In order to guarantee the performance of the products,the aquatic breeding pump is not allowed to run without water.

2.The mini pump shall be immersed in water when it is working.

3.The ferromagnetic impurities and particles are not allowed to enter in magnetic driver.

4.After converying crystallization or precipitation medium,the micro pump should be washed timely.

5.The aquatic breeding pump should run in the prescribed temperature condition.If the temperature of medium exceed standard,it will cause some problems,such as magnet demagnetization or the performance of control circuit degradation。

6.Please discharge the air in the pump cleanly before connecting up the hose to the outlet of mini pump.

7.Don’t connect the circuit polarity in the wrong way.

8.Before using it,please confirm that the dc power supply is not exceeded the highest rated voltage of mini dc pump.Otherwise,the pump would be burn.